Thorough Guide to Hide Network Name of Netgear Range Ext

Thorough Guide to Hide Network Name of Netgear Range Ext

If you didn’t have much luck in hiding the network name of your Netgear range ext so far, then worry not because our technical experts are here to assist you. In this post, we’ve shed light on the steps that’ll guide you how to hide the network name of your Nighthawk extender in a matter of minutes. So, let’s get the ball rolling.

Here’s How to Hide Network Name of Netgear Range Ext

a) Turn On Your Netgear Extender

Start by plugging your Netgear wireless extender into a wall outlet and then press the Power button. Let the LED light glow green.

Note: If the LED doesn’t turn green, then it is recommended that you reboot your WiFi device and try to hide its network name from scratch.

b) Connect the Extender and the Router

The next step in line is to create a stable connection between your Netgear range ext and your home router. You can connect your devices wirelessly and using an Ethernet cable.

Note: If you use an Ethernet cable to connect your extender and router, then ensure that it is not damaged from anywhere. Also, see that the connection between both the devices is finger-tight.

c) Access

Switch on your computer and launch an internet browser of your preference on it. Then, in the address bar of the internet browser, type and press the Enter key.

Note: If refuses to work for you, then it is recommended that you use the default IP address to log in to your Netgear range ext.

d) Enter the Default Admin Details

Pressing the Enter key will take you to the login page of your Netgear extender. You will be prompted to log in. So, fill the default username and password of your extender into their respective fields, and click Log In.

Note: If you are not certain regarding the default login credentials of your Netgear range ext, then consider getting in touch with our technical experts.

e) Navigate to the Settings Menu

Once the Netgear Nighthawk setup page comes into view, go to the Settings menu and follow the below-mentioned instructions:

  • Head over to the Wireless Settings option.
  • Uncheck ‘Broadcast this Network Name (SSID)’ for both 2.4GHz as well as 5GHz.
  • Click Apply.
  • In some time, the changes you’ve made to your device will get saved.

Note: If your Netgear range ext utilizes the older Genie UI, go to Advanced > Wireless Settings, uncheck the ‘Enable SSID Broadcast’ option, and click Apply.

By following these instructions, you’ll easily be able to hide the network name of your Netgear wireless range extender. On the off chance, you face any issues during the process, then that’s probably because of an outdated firmware. Thus, to get rid of the issue, update the firmware of your extender by following the guidelines given below:

How to Perform Netgear Extender Firmware Update?

  • Switch on your computer.
  • Launch an internet browser.
  • In the address field of the internet browser, type
  • Press Enter.
  • You will get welcomed by the Netgear range ext login page.
  • When prompted, fill the default admin details into the given fields.
  • Click Log In.
  • On the Netgear Genie dashboard, go to Settings.
  • Select Firmware Update under the Maintenance option.

Once you are done performing Netgear firmware update, see whether you are successfully able to hide the network name of your range extender. Let’s hope you do!

Summing Up

Hiding the WiFi network name (SSID) of your Netgear range ext is one of the best ways to protect your home network from unauthorized access. So, if you are looking for the steps to hide your extender’s network name, reading this post will be the right thing to do.

For any further doubts or queries, feel free to get in touch with our well-versed technical experts. They are available for you 24/7.

Still Facing Issues? Get in Touch with Our Experts.