Netgear WN3000RP Extender Beeps Twice Every 30 Minutes?
Despite achieving Netgear WN3000RP extender setup success, users have been facing issues with the device. To be specific, rolled out in the early days of January this year, the “Netgear WN3000RP extender beeps twice every 30 minutes” issue is troubling them. They have not been able to figure out as to why it occurred. When the reason is not discoverable, it can get a bit difficult to find the solution to the problem.
However, we do have a set of theories why this issue got caused and a few tips through which it can be troubleshot. To find out more about this, you ought to continue reading.
Why Does WN3000RP WiFi Extender Keep Beeping?
1. Technical Glitches
There are times, when all that causes technical issues are glitches. They might seem minor but they hold the strength to cause multiple problems related to the device, be it is a router, extender, or modem. Glitches can be hardware as well as software related. Chances are your Netgear WN3000RP wireless range extender keeps beeping at irregular intervals due to the same reason. To learn what can be done about it, read the next segment of the blog.
2. Installation Failed
Another reason that could have caused the problem at hand is that the setup of the extender failed. Perhaps, you “think” that you achieved WN3000RP extender setup process, but in reality, something went wrong during it. Maybe the connection dropped amidst the process, or there was signal interference. The solution here is for you to reconfigure the networking device using correct IP. Do not use 10.1.10.1 as it is an incorrect IP address.
How to Fix Netgear WN3000RP Keeps Beeping Issue?
1. Restart WN3000RP
Locate the power button your Netgear WN3000RP extender. It will either be located on the side panel of the front panel. Once found, apply a little pressure on it, enough to turn the device off. Now, hold on for some time. To be specific, you need to wait for five minutes. This will give your networking device enough time to rest and come back with a bang. At last, turn on your extender by pressing the same button using which you turned it off.
It is important that the POWER LED LIGHT becomes SOLID GREEN after the reboot process. It is an indication that the device has booted properly and is receiving an adequate power supply from its wall socket. In case the LED is not showing the desired color, it could be because you did not given an ample amount of time to the device to rest. To rectify your mistake, reboot the WN3000RP again and give it enough time in between.
2. Reinstall Extender
Configuring the extender after once it has already been configured is only possible if you take it back to its default mode. This can be done with the Netgear extender reset process. To go about it, you ought to find and press the RESET BUTTON. Ensure that you only do this with the help of a sharp object. Some examples are an oil pin and a paper clip. Avoid using the tip of a pen as it has been proved by experts that it brings no result.
After holding the button for more 30 SECONDS, release it. Once the device reboots, execute the NIGHTHAWK EXTENDER SETUP process using the web address and login details. In case you are not interested in using web user interface method to configure your extender, it is recommended that you use the WPS method. Once the process gets finished, see if you are able to fix the “Netgear WN3000RP extender beeps twice every 30 minutes” issue.
How to Setup Netgear Extender via WPS Method?
We could have guided you to the manual to set up your device, but, the steps given there are not easy to understand, especially for users who are not tech savvy. Given this, we will help you to set up your WN3000RP extender using these instructions:
- Find the placement of the WPS BUTTON on the extender.
- Press it once found and do the same on the router.
- Hold on and let the LED lights change color.
We are expecting that with the help of the aforementioned solutions, you will be able to eliminate the “Netgear WN3000RP extender beeps twice every 30 minutes” issue in a hassle-free manner. In case you are worried that you will experience issues related to the same model, then it is recommended that you bookmark this website.
Whenever you come across issues with your device, you will know at the back of your mind where you will find the best solutions to resolve them.
Also, if you are a tech geek and like filling your brain with the knowledge of what is new is the WiFi market, then the blog section of this website will fit your needs.