Netgear Firmware Update Bricked My Router. Help Me Fix It!
Users update their Netgear firmware to improve the performance of their wireless routers. However, the firmware update process can occasionally brick the router. This problem can occur for a variety of reasons. The good news is that it is possible to troubleshoot it. If you’re wondering how to fix the Netgear firmware update bricked my router problem, you should look into the hacks mentioned in this blog. They will undoubtedly be able to assist you when it comes to fixing the issue. So, don’t waste any more time and read on.
Troubleshoot Netgear Firmware Update Bricked My Router
1. Restart Your Router
Technical glitches are the most common and annoying causes of numerous Netgear device issues. You are most likely encountering the ‘Netgear firmware upgrade bricked my router issue’ due to the same.
To troubleshoot it, you must first eliminate technical hitches. Are you wondering how to accomplish this? The solution is straightforward: restart your Netgear wireless router. You may do this by shutting off your router, waiting a few seconds, and then turning it back on. Once you’ve successfully rebooted your device, check to see if the Netgear firmware update bricked my router problem has fixed.
2. Get a New Ethernet Cable
If you’ve tried the above hack and your Netgear router is still unusable after installing the latest firmware update, you must double-check your Ethernet connection. Maybe, it’s not steady enough to rely on. It could be possible due to the following two factors:
- The existing Ethernet cable is broken or worn out, thus a new one must be installed.
- The network devices have a shaky connection with one another.
Bring a new cable so that you can fix the first problem. The second one requires a secure connection between the Ethernet ports on both devices through an Ethernet cable.
If none of these solutions work, you should try setting up a wireless connection between your router and modem.
3. Check if Updated Firmware Version is Downloaded
It’s possible that the firmware update you downloaded is incompatible with the Netgear wireless router you’re using.
You should, therefore, attempt the firmware update once more. This time, though, be extra careful to just install the version that works with your specific device.
4. Get Rid of Viruses
Finally, see if any viruses or other forms of malware have made their way onto your computer. If that’s the case, you need anti-malware software to clean your computer and rid of any viruses.
5. Reset Your Router
If even trying the tips above, you still cannot fix the Netgear firmware update bricked my router issue, we suggest you reset your router to the factory settings.
As soon as you are done with the reset process of your device, consider doing Netgear Nighthawk setup right from the beginning.
Immediately after implementing these tweaks, you must upgrade the firmware on your Netgear router in accordance with the detailed instructions provided below.
How to Do Netgear Router Firmware Update?
When updating your wireless router’s firmware, make sure you’re using an advanced web browser.
- To access the router login page, type in the default address into your browser.
- In order to access your Netgear router’s settings, you’ll need to enter the login username and the default password.
- The BASIC Home page, containing several choices, will emerge shortly.
- To access the Firmware Update button, go to Settings first.
- Now follow the on-screen prompts to successfully upgrade the firmware on your Netgear router.
Conclusion
The purpose of this blog post is to provide a fix to the ‘Netgear firmware update bricked my router’ problem. If you can resolve the issue using the suggested solutions, that’s great. If not, then you shouldn’t wait another second before getting in touch with our tech support team.