If you are struggling with WiFi dead zones in your home, then Netgear EX6250 setup will certainly be your best bet. Netgear AC1750 EX6250 WiFi range extender is one of the best devices to get WiFi everywhere in your home.

This page will walk you through different ways to perform the Netgear AC1750 EX6250 setup on your own. Let’s get the ball rolling.

Netgear AC1750 EX6250 Setup via Netgear Installation Assistant

You can use the Netgear installation assistant for performing the Netgear AC1750 EX6250 setup. Here are the required steps:

1. Place the extender close to your WiFi router.
2. Plug the Netgear AC1750 EX6250 extender into an electrical outlet.
3. Connect your Netgear EX6250 WiFi mesh extender to the existing router.
4. Launch a web browser from a computer and type www.mywifiext.net.
5. Hitting the Enter key will open the Netgear installation assistant for you.
6. Walk through the prompts to connect your extender to the existing WiFi network.
7. Move your extender to a new location.

Stuck at any step while performing the Netgear EX6250 setup? Get in touch with our experienced technicians.

Netgear EX6250 Extender Setup Using WPS Push Button

Follow the steps given below to do the Netgear EX6250 extender setup using the WPS push button:

• Place your Netgear AC1750 EX6250 extender in the same room where your WiFi router is already kept.
• Insert the power adapter of your extender into an electrical outlet.
• Press the WPS button on the extender.

Note: If your router supports the 5 GHz band, your extender attempts to connect to the router’s 5 GHz band the first time you press the WPS button. If your extender did not connect to the router’s 5 GHz band the first time, it may result in a lot of issues during the Netgear AC1750 EX6250 extender setup.

• Move your extender to a new location.

That’s how you can complete your Netgear EX6250 Setup using WPS button.

How to Update Netgear EX6250 Firmware?

Does your WiFi extender, all of sudden, start behaving weirdly? Is it not providing the required speed even after a successful Netgear EX6250 setup? If yes, then update Netgear EX6250 firmware right away.

Here’s how to download and install the latest Netgear EX6250 firmware update:

• Before anything else, power on your WiFi extender.
• Make a wired connection between your Netgear EX6250 extender and router.
• Now, pull up a web browser as per your choice.
• Type www.mywifiext.net in the address bar and hit the Enter key.
• Log in to your extender using the username and password.
• Go to the Settings menu and click on Firmware Update option.
• Thereafter, click on the Check button.
• If there is any new firmware version available, click on the Yes button for firmware update.
• Now, wait for some time and let the Netgear AC1750 EX6250 firmware update properly.

That’s it! Your Netgear EX6250 extender’s firmware has been updated.

Common Issues Users Face During the Netgear EX6250 Setup (AC1750)

Here is a run-down of the most common issues experienced by users while performing the Netgear EX6250 setup: