It can get extremely frustrating when the Netgear Nighthawk router refuses to connect to the internet when it was brought in for the opposite purpose. In case you can relate, then it means that you are also experiencing the Netgear Nighthawk router not connecting to internet issue along with many others out there. But, troubleshooting this issue is no trouble. In this blog, we have provided the quickest methods through which you can make your networking device connect to the internet and get back online with ease. Read on.
[Fixed] Nighthawk Router Not Connecting to Internet Issue
Restart the Nighthawk Router
Commence troubleshooting the issue at hand by restarting your Netgear Nighthawk router. Perhaps, a simple restart was all that it needed to let go of the issue. In order to give your device a new start, you need to turn it off, hold on for a couple of seconds, and then, turn it back on. Check now if the Nighthawk router not connecting to internet issue has been resolved.
Check the Cable Condition
If you are still experiencing the issue, then you ought to check the wires or cables in use. Is one of them is damaged or the connection made by them loose? In case the cable feeding internet to the router is worn out or it looks as if it’s chewed by a pet, then replace it with a new one or an extra one that you have at home.
Switch the WiFi Channel
Almost every router transmits WiFi over two frequency bands namely 2.4 GHz and 5 GHz. Try to switch from the frequency band you are on to the other. This will help you to avoid temporary interference. See again if you are able to access the Netgear Nighthawk setup wizard. If not, then it means you are still stuck with the issue. Do not stop reading.
Use Any Other Device
Chances are that the Nighthawk router not connecting to internet issue does not actually exist. Perhaps you are just feeling that you are stuck with it because of the device you are using to access the internet. In this case, try using another device to access the internet and if you are able to do so on it, this means that there was a problem with the device all along.
Focus on the Router Location
For the placement of your Netgear router, the key factors to consider are obstructions, distance, and elevation. So, if you have kept your WiFi router near electronic devices or any disruptive surfaces, then it is recommended that you relocate it. While doing so, make sure that the router is not kept near concrete walls, microwave ovens, cordless phones, etc.
Run a Virus Scan on the System
In case you are still unable to make your Netgear router connect to the internet, then chances are the device you are using is infected with viruses or malicious software. To take care of the problem, consider running a scan to see if malware or a virus is on your laptop. If it turns out to be yes, then you should install the antivirus software.
Disconnect Extra Devices
Despite all the efforts that you have made, if you are still not able to make amends with the Nighthawk router not connecting to internet issue, then it means that too many devices are accessing the network of the modem. This left no space for your router to connect to it. So, disconnect all the extra devices accessing the network of the modem.
Coming across the Nighthawk router not connecting to internet issue is not a biggy. The reason being, every third user out there is experiencing it. However, troubleshooting it is where the skills of every user come into play.
Let us hope that after taking a walk through the troubleshooting hacks mentioned in this blog, you will be able to get back online. On the off chance, you are still stuck with the same issue, contacting our technical experts is a sorted option to consider. Without taking much of your time, you will be provided with solutions, the ones not mentioned in this post to resolve the issue at hand. Keeping this in mind, contact them now.